Bendix-commercial-vehicle-systems TRAILER SYSTEM GUARD AIR DRYER 7/04 Uživatelský manuál stáhnout pdf

DESCRIPTION

The Bendix

Trailer System-Guard

™

air dryer removes

moisture and contaminates from the trailer air system. It is

not intended to take the place of a dryer normally located

on the power unit. It acts as a buffer to remove moisture

during wet times and gives up water vapor during dry times.

It protects the trailer air brake system when, for short periods

of time, the trailer is pulled by vehicles without an air dryer

or during times when the trailer is disconnected from the

tractor.

The Trailer System-Guard

™

air dryer consists of two

desiccant air dryers mounted in a single housing, one to

protect the trailer service system and the other to protect

the trailer supply system.

PREVENTIVE MAINTENANCE

Every 300 operating hours, 8,000 miles, or one (1)

month:

1. Visually inspect for physical damage or wear to the Trailer

System-Guard

™

air dryer. This can include, but is not

limited to, chaffed or broken air hoses and or broken or

missing parts.

FIGURE 1 - TRAILER SYSTEM-GUARD

™

AIR DRYER

2. Check mounting bolts for tightness. If loose re-torque

per "Mounting the Trailer System-Guard

™

Air Dryer".

Every 900 operating hours or 25,000 miles or every

three (3) months:

Check for moisture in the air brake system by opening

reservoirs, drain cocks, or valves and checking for the

presence of water. If moisture is present the tractor and

trailer should be checked for leaks. If leakage is not

excessive check the tractor air dryer for proper operation.

If defective, the tractor dryer should be repaired, rechecking

trailer reservoirs again after 3 months. If the tractor dryer

operates satisfactorily and the trailer has not been

connected to a tractor without an air dryer and the trailer

glad hands were not open to the atmosphere for some

extended period of time, the trailer dryer should be replaced.

If the trailer has been connected to a tractor without an air

dryer or the trailer has been parked for an extended period

of time, the trailer should be coupled to a tractor with an air

dryer. This will help the trailer air dryer remove moisture

from the trailer. Place the unit back in service and recheck

for moisture after 3 months.

Bendix

Trailer System-Guard

™

Air Dryer

SD-08-2416

CONTROL OUTLET

SUPPLY OUTLET

CONTROL INLET

SUPPLY INLET

ALL SUPPLY & CONTROL PORTS 1/4" NPT

3/8 - 16 UNC x .50 Deep

Mounting Holes (4)

1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Air Dryer

1®DESCRIPTIONThe Bendix® Trailer System-Guard™ air dryer removesmoisture and contaminates from the trailer air system. It isnot intended to take the

Strany 2 - PERSONAL INJURY OR DEATH:

2WARNING! PLEASE READ AND FOLLOWTHESE INSTRUCTIONS TO AVOIDPERSONAL INJURY OR DEATH:When working on or around a vehicle, the followinggeneral precaut

Strany 3 - CONTROL LINE - BRAKE RELEASE

3SUPPLY LINE -CHARGINGSUPPLY LINE - PARKINGCONTROL LINE - BRAKE APPLICATIONCONTROL LINE - BRAKE RELEASECONTROLINSUPPLYINCONTROLOUTSUPPLYOUTCONTROLINSU

Strany 4 - CONNECTING THE AIR HOSES

42. Drill the three marked mounting holes into the framerail using a 5/8" diameter drill.3. By hand, install the studs into the three correspondi

Strany 5 - OPERATIONAL TEST

52. Connect the supply and control lines to the TrailerSystem-Guard™ air dryer making sure to keep the controland supply circuits separate as shown.

Strany 6

Komentáře k této Příručce

Žádné komentáře

Bendix-commercial-vehicle-systems TRAILER SYSTEM GUARD AIR DRYER 7/04 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Bendix-commercial-vehicle-systems TRAILER SYSTEM GUARD AIR DRYER 7/04. Bendix Commercial Vehicle Systems TRAILER SYSTEM GUARD AIR DRYER 7/04 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Bendix-commercial-vehicle-systems TRAILER SYSTEM GUARD AIR DRYER 7/04